The GOLDENGATE PLUS 3D associates the signal obtained from the target with its dimensions (width-length). Based on the angle of the target underground, the GOLDENGATE PLUS 3D shows the dimensions in terms of centimeters on the chart that is present on the 3D result screen. The user can figure out the dimensions of the target underground as well as the search area by looking at this data.
The GOLDENGATE PLUS 3D can draw the 3D graph of the detected signal instantly. The GOLDENGATE PLUS 3D shows the equilateral targets by using circle and square-like shapes and the long ones by using ellipse and rectangular-like shapes to its user.
DEPTH INDICATOR
The GOLDENGATE PLUS 3D shows the depth of the detected target in terms of centimeters on the depth bar present on the 3D result screen to the user.
3D result screen satisfies all the expectations of a metal detector user on a single screen. The discrimination, depth, dimensions and the graph of the target... 3D result screen provides them all both accurately and in detail with high quality graphics to its user. Detect the difference with the GOLDENGATE PLUS 3D!
GOLDENGATE SEARCH MODES
There are 5 automatic, pre-defined search modes in the GOLDENGATE PLUS 3D. The mode is selected based on the ground structure of the search area. The device adjusts all the necessary settings automatically and gets them ready for searching. These modes are General Search Mode, Deep Search Mode, High Mineral, Trash Metal and Beach Mode. In addition, the threshold & RX Gain levels for each mode can be customized and saved by the user
GROUND BALANCE
The GOLDENGATE PLUS 3D makes faster and more accurate ground balancing on every type of ground due to its fast DSP technology. This technology detects the differences based on the mineral structures of the ground more efficiently and enables the users to make ground balancing in seconds only.
The GOLDENGATE PLUS 3D checks the ground continuously during search, too, and informs the user. Searching becomes more enjoyable with the power of technology!
SENSITIVITY SETTING
(THRESHOLD & RX GAIN)
It is hard to get accurate results in areas where the ground has high levels of minerals and magnetic density. These unfavorable conditions make the device usage harder for all detector users. In the GOLDENGATE PLUS 3D, the sensitivity (Threshold & RX Gain) level can be adjusted. Based on the conditions of the search area, the threshold & RX Gain can be decreased or increased. The GOLDENGATE PLUS 3D takes the sensitivity of the search into consideration.
DISCRIMINATION
GOLDENGATE PLUS 3D provides the user with the discrimination information and the metal ID of the detected metal instantly. A discrimination setting that the user can change manually is also available in the GOLDENGATE PLUS 3D. Users, by using this setting, can define which metals the GOLDENGATE PLUS 3D will sense as non-ferrous and which ones as ferrous.
One of the most important features of the GOLDENGATE PLUS 3D is its fast RECOVERY SPEED. GOLDENGATE PLUS 3D can detect ferrous and non-ferrous metals located in close proximity and it shows the discrimination graph of each metal right on the search screen to the user.
Nokta's GoldenGate GPS and TRACKING
The GOLDENGATE PLUS 3D users can find out the coordinates of the areas they are searching in and save them. They can also view data about the altitude of the area and the search speed. They can obtain detailed information about the area such as the geographical characteristics, the history etc. when the coordinates are entered into mapping applications (Google Earth, Yahoo Maps etc) present on the Internet or on PCs. There is no risk of getting lost while searching for the lost!
GOLDENGATE PLUS 3D Technical Specifications
